Mixing and Reduction - Spray: Mix by volume 1 part D8003 base with 1 part D9001 until a smooth homogenous mixture is obtained. Reduce as necessary up to 50% with spray reducer T0006.
Brush/Roll: reduce mixed D8003/D9001 as needed up to 50% with T0031.
Induction time after mixing is 15 minutes.
Pot life is 8 hrs at 77 F/50% relative humidity.
Spray - apply Awl-Quik sanding surfacer in smooth coats of 4 to 6 mils (100-150 microns) WFT yielding 2-3 mils (50 to 75 microns) DFT. Allow 4 hrs between coats at 77 F/50% RH.
Brush/Roller - Two coats will be required. Light sanding between coats will improve appearance. For large surfaces rolling, then tipping with a brush is preferred.
Do not apply to surfaces less than 3 C/5 F above the dew point, to surfaces warmer than 41 C/105 F, or when ambient temperature is outside the range of 13 C/55 F - 41 C/105 F.